Waoo TV, Fibia, EdgeRouter Lite
Ubiquiti EdgeRouter Lite
Denne router har 3 porte – jeg bruger en til netværk og en til TV.
ethernet eth0 {
address dhcp
description Internet
duplex auto
firewall {
in {
name WAN_IN
}
local {
name WAN_LOCAL
}
}
speed auto
}
ethernet eth1 {
address 192.168.x.z/24
description Local
duplex auto
speed auto
}
ethernet eth2 {
address 192.168.y.z/24
description "IPTV"
duplex auto
speed auto
}
loopback lo {
}
igmp-proxy {
interface eth0 {
alt-subnet 0.0.0.0/0
role upstream
threshold 1
}
interface eth2 {
alt-subnet 0.0.0.0/0
role downstream
threshold 1
}
}
all-ping enable
broadcast-ping disable
group {
network-group waoo-multicast-1 {
description "Waoo multicast networks"
network 233.138.48.0/24
network 88.83.72.0/24
network 212.178.160.0/19
network 5.103.114.0/24
}
}
ipv6-receive-redirects disable
ipv6-src-route disable
ip-src-route disable
log-martians enable
name WAN_IN {
default-action drop
description "WAN to internal"
rule 10 {
action accept
description "Allow Waoo IPTV multicast UDP"
log disable
protocol udp
source {
group {
network-group waoo-multicast-1
}
}
}
rule 30 {
action accept
description "Allow established/related"
state {
established enable
related enable
}
}
rule 40 {
action drop
description "Drop invalid state"
state {
invalid enable
}
}
}
name WAN_LOCAL {
default-action drop
description "WAN to router"
rule 20 {
action accept
description "Allow IGMP"
log disable
protocol igmp
}
rule 30 {
action accept
description "Allow established/related"
state {
established enable
related enable
}
}
rule 40 {
action drop
description "Drop invalid state"
state {
invalid enable
}
}
}
receive-redirects disable
send-redirects enable
source-validation disable
syn-cookies enable
Brug show ip multicast mfc for at finde fra hvilke netværk der skal tillades UDP trafik. Kig efter adresser i kolonnen Origin som ikke er lokale og ikke din WAN.
$ show ip multicast mfc Group Origin In Out Pkts Bytes Wrong 233.138.48.139 5.103.114.2 eth0 eth2 150 4.69KB 0 233.138.48.207 88.83.72.22 eth0 eth2 45199 57.93MB 0 233.138.48.139 88.83.72.21 eth0 eth2 218469 280.02MB 0
Når det virker ser det ca sådan ud
$ show ip multicast interfaces Intf BytesIn PktsIn BytesOut PktsOut Local eth0 412.39MB 321902 0.00b 0 my.public.ip eth1 0.00b 0 0.00b 0 my.local.ip eth2 0.00b 0 412.39MB 321739 my.local.tv
Og nu fungerer det hele tilfredsstillende
